TOOLS & ACCESSORIES

Motion Pro Carb Tool 90 Degree with Bits
120.00 120.00 120.0 USD
Motion Pro carburetor tool 90 degree 1/4" hex driver. This is a 17.5" long 1/4" driver tool with a 90 degree bend on the end so you can reach in and adjust hard to reach adjustment screws on motorcycle carburetors. This tool is very versatile, it can be used with any 6mm or 1/4" hex bits!
Motion Pro T6 Combo Lever 12/13mm
35.00 35.00 35.0 USD
Super lightweight T7075 aircraft aluminium tire lever with integral ring spanner. Used by Dakar racers, RTW riders, extreme expeditions and trails. Can be used with the Motion Pro 3/8" socket adapter.
Motion Pro T6 Combo Lever
35.00 35.00 35.0 USD
Super lightweight T7075 aircraft aluminium tire lever with integrated ring spanner. Used by Dakar racers, RTW riders, extreme expeditions and trails. Choose between 22mm, 24mm, 27mm, 32mm open end to fit your needs perfectly.
Motion Pro T6 Socket adapter
21.00 21.00 21.0 USD
Designed to fit inside the Motion Pro T6 ring spanner this attachment turns your spanner into a 3/8" socket wrench and removes the need to carry additional heavy tools. Avalible in 24mm, 27mm, 32mm sizes.
Motion Pro Fork Seal Bullet
7.00 7.00 7.0 USD
This tool is intended to allow the easy installation of fork seals on inverted fork systems. It eliminates the need for the use of plastic bags or tape to protect the seal while installing over the bushing grove.
Motion Pro Mini-Pro T-Handle set
31.00 31.00 31.0 USD
T-handles make everything easier and faster. This 5-piece set includes 8, 10, 12, 13, and 14 mm sizes and is a super handy addition to your dirt bike tool kit.
Motion Pro T6 Hex Axle Tool 17, 19, 22, 24MM
37.00 37.00 37.0 USD
Fits internal hex axles on many late model sportbikes and some off-road bikes Four metric hex sizes in one tool: 17, 19, 22 and 24 mm
Motion Pro T6 Chain Tool
92.00 92.00 92.0 USD
Super lightweight chain tool. Breaks and presses side plates on chains up to 525. Weighs only 170g! If you take 4 spare links and two split links (neither included) you can repair almost any chain damage, anywhere. Essential.
Motion Pro Float Bowl Wrench
15.00 15.00 15.0 USD
An excellent small lightweight tool to allow access to your FCR carb float bowl for cleaning out blockages, changing jets and cleaning out bad fuel when mid adventure / RTW trip. Designed to remove 17mm float bowl drain plugs
Motion Pro T6 Bead Buddy
13.00 13.00 13.0 USD
Lightweight portable clamp Designed to hold the tire bead down in the drop center of the rim during tire changes. Removes the need for three tyre levers or three hands!
Motion Pro Mini-Pro Tri-Drive T-Handle
21.00 21.00 21.0 USD
Simple, lightweight set of T-Spanners for use on the trail or in your workshop. Sockets interchangable with the Motion Pro Trail tool. Includes 8mm, 10mm, 12mm and 13mm sockets
Motion Pro Sealmate Fork Seal Cleaner
6.00 6.00 6.0 USD
If you've got leaky fork seals, give this magic gadget a try before committing to an expensive seal replacement. Most leaky fork seals dont need replacing, they just need cleaning.
Motion Pro Dual Chamber Fork Cap Wrench
23.00 23.00 23.0 USD
Fork Cap wrench has an 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks. (49mm = late-model Yamaha & Honda) (50mm = KTM SX and XC models with the closed cartridge WP 4860 forks (also 2011+ Husabergs!). Don't forget to loosen your upper pinch bolts before trying to loosen the fork cap.
Motion Pro Compression Bolt Removal Tool - WP 4860 MXMA CC
23.00 23.00 23.0 USD
For removing and installing the compression valve assembly from the fork cap on WP Closed Cartridge KTM / 4860 forks.
Motion Pro PBR Chain Tool
103.00 103.00 103.0 USD
Motion Pro's newest and most innovative chain tool allows you to 'Press, Break and Rivet' all 520, 525 and 530 chains. A compact, heavy duty tool, mainly for the workshop, but still manageable on the trail for riders who don't use master links.
Motion Pro T6 Bead Buddy 2
17.00 17.00 17.0 USD
Professional full size clamp used to help hold and replace your tire onto your rim after a tire or moose change.
Motion Pro Mini Brake Bleeder, 8mm
29.00 29.00 29.0 USD
In the past, bleeding or flushing brakes meant juggling wrenches, hoses, waste brake fluid bottles, clean up rags, etc. Now Motion Pro has introduced the new Mini Bleeder, a tool that incorporates many different bleeding tools in one compact package and makes this essential job a lot easier.
Motion Pro Shock Spanner Punch
21.00 21.00 21.0 USD
Ideal tool for turning hard to reach lock ring and preload ring on rear shocks. Angled brass tip gives secure bite and protects ring from damage.
Motion Pro Ringer Fork Seal Driver, 48mm
51.00 51.00 51.0 USD
New and improved 'Ringer' fork seal driver! Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers.
Motion Pro BeadPro Tire Bead Breaker and Lever Tool Set
91.00 91.00 91.0 USD
The Bead Pro Tire Tool is an innovative, compact and lightweight tool that makes it a breeze to break tire beads and change tires on the road, trail, or even in the shop.