Kriega Haul Front Loop

    29.00 29.00 29.0 USD

    £ 20.83

    This combination does not exist.

    Add to Cart

    Attatches to your forks to provide a semi rigid pulling point. Made from ultratough Hypalon, lined with Toughtek which grips wet or dry. Comes with stainless steel buckles in one size fits all. Perfect for extreme enduro and adventure riding.


     There are 2 methods of fitting the front Haul Loop. Both use 2 x H-Duty cable ties:

    Undo web on the stainless buckles. Wrap the web around the fork leg, directly under the lower triple-clamp. Re-thread the stainless buckles(making sure to feed the web back through the buckle to 'lock' it off). The loose end can be placed under the elastic-loop provided. To prevent the Haul Loop moving down the fork leg/s you need to use a cable tie in either 2 ways. The first method is to feed the cable tie through the small web-loop next to the stainless buckle. Connect the cable tie and tighten around the fork leg directly above the lower triple-clamp (this method is illustrated on the 'Haul Loop' page) Another method is to use 2 x cable ties linked together in a figure of eight behind the front light/number plastic (this method is shown on this page). The figure of eight method is a superior one, as you can fine tune the angle of the Haul Loop by decreasing the length/s of the cable ties. The shorter the tie the more elevated the Haul Loop will sit (see Works Series video).

    TECH-SPECS
    • Semi-rigid design

    • Universal fit (front only)

    • Ultra-tough construction

    • HYPALON: abrasion resistant re-enforcement

    • TOUGHTEK - grips wet or dry

    • Alloy buckles

    WEIGHT
    • 70g /2.4oz

     
     

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products