Motion Pro Micro Bleeders
Motion Pro has a redesigned fork bleeder. It is a new smaller lower profile design that is only 11mm high when installed. It is made from a stainless steel body that is stronger and resists corrosion. The kit comes with two bleeders and is available for most late model Showa, KYB and WP forks. They have blue or black caps and some have orange anodizing for KTMs.
Micro Bleeder colour and fork model guide:
M4x0.7, WP 4860 MXMA, 4CS.
For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1) as well as the WP 4CS fork
Also for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment.
These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap
Summary of fitments: All KTM EXC from 2008 on! KTM 950/990 Adventure (2006+), KTM 950 Super Enduro
Part No. 11-0080
M4x0.7, WP 43-48 W/O Ext Preload.
For use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0020S and 4860.0020S1) without external spring preload adjustment.
These fork caps DO NOT require a pin spanner to remove the fork cap
Summary of fitments: All KTM EXC from 2002 to 2007! KTM 690 Enduro (NOT 2014>)
Part No. 11-0081
For Showa Forks - M5x0.8.
For use on most Showa inverted forks with a M5x0.8 air bleed screw in the fork cap
(Japanese MX and enduro)
Part No. 11-0089
For KYB forks - M5x0.8
For use on most KYB inverted forks with a M5x0.8 air bleed screw in the fork cap
Part No. 11-0095
New ultra-compact, low profile design is only 11mm high installed
Stainless steel body is stronger and will not corrode
Will fit on many late model Japanese off-road motorcycles
Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder
Reduces harshness caused by air build-up
Allows bleeding of air pressure without tools
One of the easiest bolt-on upgrades you can make to your forks
Kit includes two bleeder valves
Once the user has seen at least one product this snippet will be visible.