The Scrambler mirror is a new version of the Doubletake original Enduro Mirror but in a more compact package. The Scrambler mirror is less prone to movement than the Enduro Mirror due to the short length to the 1" ball. We find it best used with a 6" RAM Mounts Arm.

This kit includes 1 x Mirror, 1 x 5 1/4" Arm, 1 x Ball Mount. The Double Take Adventure Mirror was made specifically for the Adventure Bikes that spend more time on the tarmac. Less vibration and more solid fixing to stop the mirror moving at high speed due to wind blast than any other mirror on the market. NOTE: You will need 2 x kits for left and right side of your bike.

The Doubletake Enduro Mirror - 1" RAM Compatible Ball (sold individually)! With outstanding visibility from the convex shaped mirror glass, a virtually indestructible body, and the convenience of a RAM ball at the end, the Doubletake Mirror is the perfect choice for replacing or adding mirrors to your bike.

If you are looking for a low profile way to keep track of people off-road, the trail mirror is for you. The trail mirror mounts directly to your handlebar with a Panduit® tie wrap and sleeve. These are much stronger than ordinary ties and are UV resistant.

DoubleTake mirrors are indestructible mirrors for dual-sport and adventure motorcycles. Using the Ram setup for adjust ability. This is only the Mirror without the RAM hardware.

The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.

Aluminum extension with 10mm x 1.25 male and female threads. Works with standard Ball Stud Base (10 x 1.25) to offer clearance around controls in some applications.

Right hand mirrors on Yamahas, certain Betas, and certain KTM bikes may require a reverse thread adapter. Some models (WR250s) are factory equipped with a reverse thread adapter

Replacement glass reflector for the Double Take Adventure Mirror, held in place with clear silicone.

10mm x 1.25 threaded mirror mount on horizontal split clamp. Allows mounting on clutch or brake master cylinder for most KTMs, and many Beta, etc.

Replacement glass reflector for the Double Take Enduro Mirror, held in place with clear silicone.

Double Take Mirror mount split clamp assembly, 10mm x 1.25. Adapts a standard ball stud base onto any 7/8ths or any oversize 1 1/8ths handlebar.

Standard 3" long RAM arm with sockets to take the 1" diameter ball on either end

1 3/4 inch connecting arm with 1 inch ball sockets on each end for attaching an endless number of products to your bike. Powder coated cast aluminium and seemingly indestrucable!

5 1/4 inch connecting arm with 1 inch ball sockets on each end for attaching an endless number of products to your bike. Powder coated cast aluminum and seemingly Indestructible!

Adventure Spec heavy duty exhaust heat shield. Stainless steel construction. Creates a 30mm buffer zone away from hot exhaust. Ideal for soft luggage that may melt on direct contact with exhaust. Supplied with two heavy duty stainless steel hose clips for mounting. Weight = 204g / 7.2oz.

A mini-fairing support designed to be used with our optional mini-fairing screen and AMPS bracket (sold separately). When used together the mini-fairing is designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm and 28mm fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes. IMPORTANT: Do not over tighten your Mini Fairing handlebar clamps. Only tighten the bar clamps enough to prevent rotational motion. Over tightening may result in clamp failure.

A mini-fairing screen designed to be mounted onto our mini-fairing support. When used together the mini-fairing is designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm and 28mm fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes.

An AMPS mounting bracket that is designed to work with the Adventure Spec Mini Fairing Support. The AMPS configured holes allow you to mount any AMPS compatible device such as mobile phone holders, GPS cradles, roadbooks, RAM mounts amongst others. Works with the CRF300L, CRF450L, Universal and 690/700/701 fairing supports. Weight = 30g / 1.05oz

A heavy duty decal sticker designed to fit our Mini Fairing Screen perfectly. A great way to personalise your lightweight adventure bike. Also available in other designs.