he Adventure Spec Singletrack Jacket is a waterproof over jacket that features abrasion resistant reinforced panels in key impact areas. The main body fabric is AS-Tex 210D 3 layer nylon 6-6 ripstop fabric that is super breathable, windproof and waterproof to a hydrostatic head of 28,000mm. Shoulders, hips and elbows are further protected by Du-Pont Kevlar panels. Large underarm zippered vents allow for temperature regulation. An integrated hood can be worn under your helmet to provide ultimate dry riding in the worst conditions, and the hood folds into the collar when not in use. A longer tail helps to keep water and mud out when riding in the standing position. The Singletrack Jacket is designed for lightweight adventure, trail and dual sport riding in cool to moderately warm climates where there is a higher chance of poor weather. Weight - 702g. NEW! Now also available in Triple Black colour.
20% off any Core baselayer when bought with this jacket. Just add both items to cart for discount.
THE SINGLETRACK JACKET
The moto jacket with a hood
One of the only adventure motorcycling jackets to feature a packable hood. When you are at camp, and it's raining, you don't need an extra jacket.
If it's really hammering down you can wear the hood under your helmet on the bike.
Roll the hood up into the collar when not required.
Massive underarm vents
Regulate temperature by opening the large underarm vents. Perfect for riding through changeable weather, reducing the need to take off your jacket. When it starts raining again close the vents with the waterproof zips.
(The Singletrack Jacket is a waterproof over jacket. We use the The Supershirt for our abrasion and impact protection.)
Buy The Supershirt here
Shoulder, hips and elbows
Kevlar® is a trademark of affiliates of DuPont de Nemours, Inc.
Find out more about this abrasion protection here.
Three part laminate performance
The outer fabric is constructed from nylon 6-6 using 240 denier thread, which is woven in a rip-stop pattern for strength. The middle membrane contains a layer of hydrophilic PU film that provides high levels of waterproof performance and wind resistance. The inner fabric is constructed from a lightweight wicking protective layer that is designed to be comfortable when worn against skin.
The outer, middle and inner materials are laminated together into one high performing three-layer fabric that has been uniquely designed and manufactured by Adventure Spec.
Find out more about of fabric tech here
"I bought the jacket last week, awesome fit and it is also good to combine it with the Mongolia Jacket."
Shoulder and back logos are made from highly reflective material. Look good and be seen in the dark.
The long tail
A generous cut on the rear of the jacket covers your bum and keeps the water out while stood up on the pegs in the rain and mud. It also helps keep you dry when you sit down on that soggy log at camp.
Throttle friendly chest pocket
A chest pocket on the right side of the jacket allows use with your left hand, whilst you keep your right hand on your throttle and brake lever.
Light Is Right
At just 702g (size M) the Singletrack Jacket is light to wear and takes up very little pack room in your luggage.
"I found this jacket to be absolutely perfect for the job"
Match it with the ADV Layer pouch
The Singletrack Jacket stuffs perfectly into the ADV Layer Pouch Large. Our Magadan luggage system is designed to make sure you have all your layers ready when you need them.
Buy The ADV Layer Pouch here
Take less gear
Think of the Singletrack Jacket as an outdoor walking jacket, that's built for adventure motorcyclists. It's as good off the bike as on. We've had reports that it's pretty handy for walking the dog too!
Read more about the many uses of The Singletrack Jacket here
"I take this any time I think it might rain, and it’s been on all my longer adventures. I’ll wear it on as a final rain proof layer, or as my only outer layer - it’s nice to know I can ride through brambles thanks to the kevlar."
Designed for those of us who want to ride far and light this unique jacket was designed to provide a lightweight fully waterproof and vented shell for use on the bike, for those evenings huddled around a damp campfire or for those off-bike exploration days.
The main body fabric was designed by Adventure Spec specifically for this garment range and is a lightweight 3-layer ripstop technical fabric. Working alongside this to keep you safe in the event of drops and slides (also unique to AS) is a 3-layer DuPont™ Kevlar® reinforced material on the elbows, shoulder and hips. These fabrics ensure the jacket is light, tough and abrasion resistant.
To keep the weight down we kept the features list very simple.
A packaway hood specifically designed to work under helmets helps stop water from pouring down your neck on those long wet days in the saddle, as well as keeping you warm and dry around the campfire or whilst out shopping for your next meal.
A set of closable underarm vents to keep the airflow cooling your core whilst the rest of the shell keeps you dry.
A single chest pocket on the RIGHT breast of the jacket, meaning you can access it with your left hand so that your right hand stays firmly on the throttle/brake (exactly where you always want it to be!).
Watch Adventure Spec gear in action on the Trans Euro Trail
Find out how we put Adventure Spec clothing together for multi day TET adventures