Rear Luggage Rack Plate for your KTM 450 / 500 EXC-F (2017 - 2019 models). Lightweight Aluminium luggage plate perfect to strap a top bag / duffel / roll bag to, or a tool / fuel pack. Side luggage supports match up perfectly and are sold separately. Rated for luggage not exceeding 4kg. Weight = 1250g / 44oz

Side Luggage Supports for your KTM 450 / 500 EXC-F (2017 - 2019 models). These lightweight but rugged Aluminium supports will give you the base you need for mounting regular throw-over pannier style saddlebags such as our Magadan Panniers. Designed to work with our Rear Rack which is sold separately. Weight = 1890g / 66.6oz

Rear Luggage Rack Plate for your Honda CRF450L CRF450RL. Lightweight Aluminium luggage plate perfect to strap a duffel/roll bag to, or a tool/fuel pack. Side luggage supports match up perfectly and are sold separately.

Side Luggage Supports for your Honda CRF450L / CRF450RL. These lightweight but rugged Aluminium supports will give you the base you need for mounting regular throw-over pannier style saddlebags such as our Magadan Panniers. Designed to work with our Rear Rack which is sold separately.

A strong and lightweight aluminium Tail Tidy / Plate holder for your Honda CRF450L / CRF450RL to reduce the bulk of the rear end, while still being fully legal for road use.

A strong and lightweight aluminium Tail Tidy / Plate holder for your Honda CRF 250L (2013 - 2019 models) to reduce the bulk of the rear end, while still being fully legal for road use. Weight = 570g / 20.1oz

A simple Tail Tidy / Plate Holder to lift and clean up the rear of the bike, preventing the inevitable destruction of the original tail assembly during drops. T7 / T700. Also fits the new T700 World Raid.

A powder coated tough flat-plate rear rack incorporating pillion/strapping handles, 4 holes to mount a RotoPax water/fuel tank mount and edge strapping points for your Yamaha Tenere 700 / T7 / T700. Also fits the new Tenere T700 World Raid.

A set of powder coated, simple, lightweight rear luggage plates designed to keep your soft luggage from folding under your back wheels on your Yamaha Tenere 700 / T7 / T700. Also fits the new Tenere 700 World Raid. Weight 1.6kg / 3.5lb

This kit includes 1 x Mirror, 1 x 5 1/4" Arm, 1 x Mall Mount. The Double Take Adventure Mirror was made specifically for the Adventure Bikes that spend more time on the tarmac. Less vibration and more solid fixing to stop the mirror moving at high speed due to wind blast than any other mirror on the market. NOTE: You will need 2 x kits for left and right side of your bike.

The Doubletake Enduro Mirror - 1" RAM Compatible Ball (sold individually)! With outstanding visibility from the convex shaped mirror glass, a virtually indestructible body, and the convenience of a RAM ball at the end, the Doubletake Mirror is the perfect choice for replacing or adding mirrors to your bike.

If you are looking for a low profile way to keep track of people off-road, the trail mirror is for you. The trail mirror mounts directly to your handlebar with a Panduit® tie wrap and sleeve. These are much stronger than ordinary ties and are UV resistant.

A mini-fairing support designed to be used with our mini-fairing screen. When used together the mini-fairing is designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm and 28mm fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes. IMPORTANT: Do not over tighten your Mini Fairing handlebar clamps. Only tighten the bar clamps enough to prevent rotational motion. Over tightening may result in clamp failure.

Barkbusters Handguards are engineered to provide unrivaled strength and superior durability. These hardened aluminum, full-wrap backbones are designed with a two-point mounting system to prevent or lessen the damage of hand controls in the event of a crash.

Replacement Plastic Guards for Barkbusters VPS handguards, includes adjustable wind deflectors.

Replacement oversize plastics for your Barkbusters Handguards which help keep the weather at bay during adverse conditions on rally, enduro, adventure or road rides. Can be fitted to all our VPS handguard alloy backbones as well as to S1, S2, S4, S5 & S7.

A mini-fairing screen designed to be mounted onto our mini-fairing support. When used together the mini-fairing is designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm and 28mm fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes.

DoubleTake mirrors are indestructible mirrors for dual-sport and adventure motorcycles. Using the Ram setup for adjust ability. This is only the Mirror without the RAM hardware.

The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.

Aluminum extension with 10mm x 1.25 male and female threads. Works with standard Ball Stud Base (10 x 1.25) to offer clearance around controls in some applications.