Rear Luggage Rack Plate for your Honda CRF 250L. Lightweight Aluminium luggage plate perfect to strap a duffel/roll bag to, or a tool/fuel pack. Side luggage supports match up perfectly and are sold separately. Rated for luggage not exceeding 4kg. Weight = 1380g / 48.6oz

The benchmark in after market footpegs. Wider, longer, and pivoting these steel pegs make for all day riding comfort whether riding sitting down through alpine passes or standing up over 1000km Dakar stages. Perfect for rally enduro or adventure use on your Yamaha Tenere 700 / T7 / T700. MK4 version 15mm longer than MK3 at 100mm. 115mm from footpeg pin to end of peg...

The benchmark in after market footpegs. Wider, longer, and pivoting these pegs make for all day riding comfort whether riding sat down through alpine passes or stood up over 1000km Dakar stages. Perfect for rally enduro or adventure use.

The benchmark in BMW R1200 / 1250GS & GSA after market footpegs. Wider, longer, and pivoting these pegs make for all day riding comfort whether riding sat down through alpine passes or stood up over 1000km Dakar stages. Perfect for rally enduro or adventure use.

The benchmark in after market footpegs. Wider, longer, and pivoting these pegs make for all day riding comfort whether riding sat down through alpine passes or stood up over 1000km Dakar stages. Perfect for rally enduro or adventure use.

Rear Luggage Rack Plate for your KTM 450 / 500 EXC-F (2017 - 2019 models). Lightweight Aluminium luggage plate perfect to strap a duffel/roll bag to, or a tool/fuel pack. Side luggage supports match up perfectly and are sold separately. Rated for luggage not exceeding 4kg. Weight = 1250g / 44oz

Side Luggage Supports for your KTM 450 / 500 EXC-F (2017 - 2019 models). These lightweight but rugged Aluminium supports will give you the base you need for mounting regular throw-over pannier style saddlebags such as our Magadan Panniers. Designed to work with our Rear Rack which is sold separately. Weight = 1890g / 66.6oz

Rear Luggage Rack Plate for your Honda CRF450L. Lightweight Aluminium luggage plate perfect to strap a duffel/roll bag to, or a tool/fuel pack. Side luggage supports match up perfectly and are sold separately.

Side Luggage Supports for your Honda CRF450L. These lightweight but rugged Aluminium supports will give you the base you need for mounting regular throw-over pannier style saddlebags such as our Magadan Panniers. Designed to work with our Rear Rack which is sold separately.

A strong and lightweight aluminium Tail Tidy for your Honda CRF450L to reduce the bulk of the rear end, while still being fully legal for road use.

A strong and lightweight aluminium Tail Tidy / Plate holder for your Honda CRF 250L to reduce the bulk of the rear end, while still being fully legal for road use. Weight = 570g / 20.1oz

A simple tail tidy / Plate holder to lift and clean up the assembly of the rear of the bike, preventing the inevitable destruction of the original tail assembly during drops.

A powder coated tough flat-plate rear rack incorporating pillion/strapping handles, 4 holes to mount a RotoPax water/fuel tank mount and edge strapping points for your Yamaha Tenere 700 / T7 / T700.

A set of powder coated, simple, lightweight rear luggage plates designed to keep your soft luggage from folding under your back wheels on your Yamaha Tenere 700 / T7 / T700.

The Atacama Race Pant is an in-the-boot riding pant/trousers designed for adventure, trail and dual sport riding. It features super tough 1000D ballistic nylon in key abrasion zones and large zippered thigh vents for extreme cooling in hot environments. Washable and heat resistant knee fabric helps withstand the degradation that can occur to other materials such as leather. The knee box area is designed to fit over knee braces, or you can insert armour into the internal knee pocket. The Atacama Race Pant is a great choice for multi day race / expedition riding where comfort, longevity and protection are all key considerations. Weight - 1146g

The Double Take Adventure Mirror was made specifically for the Adventure Bikes that spend more time on the tarmac. Less vibration and more solid fixing to stop the mirror moving at high speed due to wind blast than any other mirror on the market.

The Doubletake Enduro Mirror - 1" RAM Compatible Ball (sold individually)! With outstanding visibility from the convex shaped mirror glass, a virtually indestructible body, and the convenience of a RAM ball at the end, the Doubletake Mirror is the perfect choice for replacing or adding mirrors to your bike.

If you are looking for a low profile way to keep track of people off-road, the trail mirror is for you. The trail mirror mounts directly to your handlebar with a Panduit® tie wrap and sleeve. These are much stronger than ordinary ties and are UV resistant.

A mini-fairing support designed to be used with our mini-fairing screen. When used together the mini-fairing is designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm and 28mm fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes.

The New Voyager Yamaha Tenere 700 handguards introduce Cycra into the world of Adventure touring motorcycles.