A mini-fairing screen and mount designed to provide protection from the elements and give options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen is available in a variety of colours. The support mounts directly to your handlebars and is available in 22mm / 7/8" and 28mm / 1 1/8" fat bar options. This will fit most small - mid capacity enduro, trail, adventure and dual sport bikes.

Natural rubber Inner Tubes that repair and patch easily, a must for long distance Adventure, Trail and RTW riding. They aren’t cheap, but they aren’t expensive for what you get.

A rugged 4mm thick Aluminium Bash/Skid Plate for your Honda CRF450L designed to protect your engine and its many emission regulations 'extras' from the most intense of adventures.

A mini-fairing for your CRF450L designed to provide protection from the elements and options for mounting electrical accessories such as GPS, USB, switches, lighter sockets and rally roadbook holders. The screen comes in a variety of colours and the support mounts directly to your forks.

The Double Take Adventure Mirror was made specifically for the Adventure Bikes that spend more time on the tarmac. Less vibration and more solid fixing to stop the mirror moving at high speed due to wind blast than any other mirror on the market.

Right hand mirrors on Yamahas, certain Betas, and certain KTM bikes may require a reverse thread adapter. Some models (WR250s) are factory equipped with a reverse thread adapter

Universal Fatbar Mounting Adaptor. Allows a 'Fatbar' (28mm) to be fitted to a 'Standard' (22mm) handlebar mount. Also rises the bars by 20mm.

Replacement Plastic Guards for Barkbusters VPS handguards, includes adjustable wind deflectors.

Replacement oversize plastics for your Barkbusters Handguards which help keep the weather at bay during adverse conditions on rally, enduro, adventure or road rides. Can be fitted to all our VPS handguard alloy backbones as well as to S1, S2, S4, S5 & S7.

Carbon Fibor plastics for your Barkbuster Handguards designed for Street, Cruiser, Naked, Touring and Adventure bikes as well as Scooters. Made from genuine hand laid carbon-fibre, the Carbon is a unique blend of style and practicality to complement the look of your bike.

One bolt and 20mm spacer that fits between handlebar clamp and backbone for extra clearance of controls.

External bar end weights to go on your VPS handguards (not required for model specific kits supplied with factory bar weight replacements) Designed to minimize handlebar vibration.

Bar end weights for the Kawasaki 650 Versys (and others). To be used in conjunction with VPS Hanguards (BHG1) and a standard fitting kit (BTC-STD) for a complete set of Barkbusters Handguards. Designed to minimize handlebar vibration.

Optional part for KTM and other motorcycles with hydraulic clutches/brakes (typically with a Brembo master cylinder). This part dramatically increases clearance around the clutch or brake hose area.

Barkbusters VPS Skid Plate set. This kit adds a stylish finish to the outer edge of the handguard and protects the aluminium handguard bar from impacts.

This design clamp fits around the control cables and hoses that often get in the way when mounting handguards. The offset clamp connectors can be swapped from left to right to position the clamp on the best section of the taper to achieve a correct fit.

Our BMW F800GS bash / skid plate is designed to protect your engine sump, exhausts and frame rails from impact and slides. Made from 4mm thick aluminium for strength and weight saving. Use with our Adventure Spec F800GS crashers for complete protection. Can also fit the F650GS Twin and F700GS with BMW baseplate fitting kit part number 71607704773.

This skid/bash plate provides upgraded protection to your KTM LC8 Adventure 950/990 engine and exhaust system. It features a 5mm aircraft grade aluminium centre section and 4mm sides. The front area incorporates space to fit tools and spares.

This skid/bash plate provides upgraded protection to your KTM 690 / Husqvarna 701 engine sump and rear master cylinder. It features a 5mm aircraft grade aluminium centre section and 4mm sides. Fits all KTM 690 E/R 2008 - 2020 and Husqvarna 701 2016+

This skid/bash plate provides upgraded engine and exhaust protection to your KTM 1190 Adventure. It features a 5mm aircraft grade aluminium centre section and 4mm sides. Available in colour options. Use with our Adventure Spec crash bars for complete protection.